Matronics Email Lists :: View topic - pitot static plumbing

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

pitot static plumbing

Matronics Email Lists Forum Index -> Zenith601-List

View previous topic :: View next topic

Author Message

chris Sinfield

Joined: 28 Nov 2006
Posts: 270
Location: Sydney Australia

Posted: Fri Sep 03, 2010 4:17 am Post subject: pitot static plumbing

Ok now for the exciting stuff

has anyone used the quick push in couplings for their air lines?

which to get Stein Air's? , Spruce?? 

Also going to use the second pipe on the Zenith Pitot tube for AOA and putting in 2 fuse static ports



please post your comments.. 

Chris

jaybannist(at)cs.com
Guest

Posted: Fri Sep 03, 2010 4:28 am Post subject: pitot static plumbing

Chris,

 

 My DAR says he really prefers the push-on barbed connections for pitot and static.  Once on there, they will not come off.  They must be cut off and a new piece of tubing installed.  He says the compression type connections tend to leak and fail a pressure check. 

  

     

 Jay Bannister

  

    

     

  

     

  

    --

naumuk(at)windstream.net
Guest

Posted: Fri Sep 03, 2010 5:37 am Post subject: pitot static plumbing

Chris-

    If you're talking about the couplings shown on the HH DVDs, I never got 

an answer from Mark Townsend where he procured them, and I never saw them 

offered the last time I was at Oshkosh. Neat idea if you can find them.

                                                                             

    Bill

                                                do not archive

---

naumuk(at)windstream.net
Guest

Posted: Fri Sep 03, 2010 5:38 am Post subject: pitot static plumbing

Jay-

     Interesting. Since I couldn't  find the "quick disconnect" couplings for sale, your suggestion is the route I  took. 

                                                                                          Bill

                                           do  not archive

 [quote]   ---

Afterfxllc(at)aol.com
Guest

Posted: Fri Sep 03, 2010 5:48 am Post subject: pitot static plumbing

Chris

  

 It depends of the type line you run also. If you run rubber hose (like fuel  line) use clamps , if you run 1/4 inch nylon use compression, and if you use the  clear rubber you can use barbed fittings. We do a pitot static check of each  aircraft and most have leaks and we repair them with compression fittings and  nylon lines. If your brake lines don't leak then that's pretty good  evidence it works and works well.

  

 Jeff 

  

  In a message dated 9/3/2010 8:18:38 A.M. Eastern Daylight Time,  chris_sinfield(at)yahoo.com.au writes:

  	  Quote: 	
		  -->    Zenith601-List message posted by: "chris Sinfield"    <chris_sinfield(at)yahoo.com.au>



Ok now for the exciting    stuff

has anyone used the quick push in couplings for their air    lines?

which to get Stein Air's? , Spruce?? 

Also going to use the    second pipe on the Zenith Pitot tube for AOA and putting in 2 fuse static    ports



please post your comments.. 

Chris





Read    this topic online    here:



http://forums.matronics.com/viewtopic.php?p=311206#311206===============================================

_-=    Use the  ties  Day  ================================================               - MATRONICS WEB FORUMS  ================================================             - List Contribution Web Site  sp;                          �  ===================================================



	


  [quote][b]

wa7dvd

Joined: 27 Oct 2006
Posts: 11
Location: Salt Lake City, Ut

Posted: Fri Sep 03, 2010 10:00 am Post subject: Re: pitot static plumbing

I used the Safe Air quick connects that are now sold by Steinair.  I have not had the official static test done yet but from the testing I did they seal very well when using the nylon tube they sell for it



-Bruce-.

_________________
BK Johnson
Zodiac 601XLb
Jabiru 3300a
N601BK

johnd

Joined: 09 Jun 2009
Posts: 27

Posted: Fri Sep 03, 2010 10:10 am Post subject: pitot static plumbing

I've used the SafeAir fittings as well and have not had any problems 

with my Pitot Static tests. You can also purchase them from 

www.safeair1.com.



John Davis

N601JD - 601XL



On 9/3/2010 2:00 PM, wa7dvd wrote:

 	  Quote: 	
		   



 I used the Safe Air quick connects that are now sold by Steinair.  I have not had the official static test done yet but from the testing I did they seal very well when using the nylon tube they sell for it



 -Bruce-.



 --------

 BK Johnson

 Zodiac 601XLb

 N601BK





 Read this topic online here:



 http://forums.matronics.com/viewtopic.php?p=311266#311266

chris Sinfield

Joined: 28 Nov 2006
Posts: 270
Location: Sydney Australia

Posted: Fri Sep 03, 2010 2:55 pm Post subject: Re: pitot static plumbing

Thanks  Gang 



I was going to use the Safe air stuff but have just read it works only with their tubing.. Thats why I was looking at the Stein Air fittings. 



I have as l  have ready run the Zenith supplied 1/4 inch stuff, maybe the barbed T's and stuff are the way to go. where do we get them from Spruce?

Chris

scottbevier

Joined: 19 Jun 2007
Posts: 8

Posted: Fri Sep 03, 2010 3:18 pm Post subject: pitot static plumbing

The push in quick connects are made by SMC. The KV series. They also make

the tubing.

Read all about it. Get CAD drawings.

http://www.smcusa.com/sections/products/fittings_tubings.asp

--

rolif6
Guest

Posted: Fri Jun 28, 2024 11:48 am Post subject: Re: pitot static plumbing

Pitot static plumbing in aircraft refers to the intricate network of tubes and sensors designed to measure air pressure for critical flight data, such as airspeed and altitude. This system includes both pitot tubes, which capture ram air pressure, and static ports, which sense ambient air pressure. Proper maintenance and calibration of these components are crucial for accurate readings, ensuring the safety and efficiency of flight operations. Click here https://clearwateremergencyplumber.com/sewer-backup/ for more detailed information on pitot-static plumbing and its importance in aviation.

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith601-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum