BruceOviatt
Joined: 13 Feb 2011 Posts: 3
|
Posted: Tue Aug 02, 2022 6:42 am Post subject: Ignition..no power from Module A |
|
|
Flew one hour after both mags on my 1994 912ul checked well.� After landing I rechecked the mags but the left one was dead. Then called a Rotax tech and checked ground connections and reversed connections from ignition bundle to both modules but no change so I replaced Module A as recommended.
�Started the engine with the right mag but still no spark from the left mag - Module A. Talked to a Rotax tech at Airventure.� Then did a continuity check of single wires coming from ignition bundle.� One red wire to Module A had no continuity so started trimming the� wire back until I had continuity.� Soldered a new wire to it and a new connecter to the other end. Plugged the Module A wire into the the new connector and now have good flow of power to those spark plugs.� �Could have saved $800 if I had checked continuity first.��
Credit goes to Morris Smith, Rotax Tech in Lucedale, MS.�
Sent from Samsung tablet
| - The Matronics Kitfox-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
|
|