Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Tug for RV 10

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

docclv(at)windstream.net
Guest

Posted: Sun Oct 01, 2023 7:07 am Post subject: Tug for RV 10

RV10-List Digest Server wrote:

 	  Quote: 	
		   *



   ==================================================

     Online Versions of Today's List Digest Archive

   ==================================================



 Today's complete RV10-List Digest can also be found in either of the

 two Web Links listed below.  The .html file includes the Digest formatted

 in HTML for viewing with a web browser and features Hyperlinked Indexes

 and Message Navigation.  The .txt file includes the plain ASCII version

 of the RV10-List Digest and can be viewed with a generic text editor

 such as Notepad or with a web browser.



 HTML Version:



      http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 23-09-29&Archive=RV10



 Text Version:



      http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 23-09-29&Archive=RV10

   ================================================

     EMail Version of Today's List Digest Archive

   ================================================



   

             ----------------------------------------------------------

                             RV10-List Digest Archive

                                        ---

                       Total Messages Posted Fri 09/29/23: 1

             ----------------------------------------------------------

   

   

 Today's Message Index:

 ----------------------

   

       1. 02:21 PM - Re: Tire Size  (Bob Turner)

   

   

   

 ________________________________  Message 1  _____________________________________

 Time: 02:21:54 PM PST US

 Subject: Re: Tire Size

 From: "Bob Turner" <bobturner(at)alum.rpi.edu>

 Stock size for me, but always a hard surfaced runway (so far).



 --------

 Bob Turner

 RV-10 QB

 Read this topic online here:



 http://forums.matronics.com/viewtopic.php?p=511528#511528

   



   

 Guys:  We have built 2 RV 10's over the past 10 years.  The last one in 2018.  We put the standard kit Grove Brakes on the 1st one and Matco Brakes on the 2nd one.  The Matco Brakes with 4 pads certainly Brake much better.  You can replace the Groves without much trouble if you want to spend the money and if I were to build another RV 10 I would install the Matcos.  They are about the same cost as the kit Groves.

   However, The Matcos add a fair amount of drag to the plane pushing it into the hanger especially with only a few inches of incline up to the door.  As a result, we built a tug for the 10.  It is made out of a 3/8" plate for the front tire to run up on and 10ga triangular side panels forming a triangular box for the wheel and cowling to fit in (a foot wide).  We drive it with a 12volt camper slide-out motor mounted in front of the wheel box (It turns at 8rpm and has 820 ft lbs torque whis is strong enough).  5/8" shafting from the motor extending out each side the width of the wheel box with #40 chain drive from a 3" sprocket on the drive shaft to a 6" sprocket bolted and spaced outside Harbor Freight 4.00-6 air inflated tires.  The drive tires are mounted to the sides of the box with 5/8" fixed axels.  Put a handle about 5 feet long with a momentary 2 position switch for (forward and reverse) and a 12volt lawn mower battery in front of the box.  Mounted some 2 1/2" casters just in front of the drive wheels so you can lift the wheel box and drive wheels off the ground by tilting wheel box up with the handle.  Total cost about $500.  Works fine.

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

rleffler

Joined: 05 Nov 2006
Posts: 680

Posted: Sun Oct 01, 2023 7:56 am Post subject: Tug for RV 10

Doc,

 

 

 Do you have photos, plans, part/vendor list for your tug?   I�m looking to build one this year as a winter project.  I have been looking at the various units people have built.  I like the tray approach.

 

 

 Bob (at) thelefflers (at) com if you don�t want to post to the mailing lists.

 

 

 Thanks,

 Bob

 

 

  

 

 Get Outlook for iOS

 

  From: owner-rv10-list-server(at)matronics.com <owner-rv10-list-server(at)matronics.com> on behalf of Doc <docclv(at)windstream.net>

 Sent: Sunday, October 1, 2023 11:06:57 AM

 To: rv10-list(at)matronics.com <rv10-list(at)matronics.com>

 Subject: Tug for RV 10  

 

  --> RV10-List message posted by: Doc <docclv(at)windstream.net>

 

 RV10-List Digest Server wrote:

 > *

 >

 >   =========================

 >     Online Versions of Today's List Digest Archive

 >   =========================

 >

 > Today's complete RV10-List Digest can also be found in either of the

 > two Web Links listed below.  The .html file includes the Digest formatted

 > in HTML for viewing with a web browser and features Hyperlinked Indexes

 > and Message Navigation.  The .txt file includes the plain ASCII version

 > of the RV10-List Digest and can be viewed with a generic text editor

 > such as Notepad or with a web browser.

 >

 > HTML Version:

 >

 >       http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter=2023-09-29&Archive=RV10

 >

 > Text Version:

 >

 >       http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter=2023-09-29&Archive=RV10

 >

 >

 >   =======================

 >     EMail Version of Today's List Digest Archive

 >   =======================

 >

 >   

 >           � ----------------------------------------------------------

 >           �            �    RV10-List Digest Archive

 >           �            �           �   ---

 >           �           Total Messages Posted Fri 09/29/23: 1

 >           � ----------------------------------------------------------

 >   

 >   

 > Today's Message Index:

 > ----------------------

 >   

 >       1. 02:21 PM - Re: Tire Size  (Bob Turner)

 >   

 >   

 >   

 > ________________________________  Message 1  _____________________________________

 >

 >

 > Time: 02:21:54 PM PST US

 > Subject: Re: Tire Size

 > From: "Bob Turner" <bobturner(at)alum.rpi.edu>

 >

 >

 > Stock size for me, but always a hard surfaced runway (so far).

 >

 > --------

 > Bob Turner

 > RV-10 QB

 >

 >

 > Read this topic online here:

 >

 > http://forums.matronics.com/viewtopic.php?p=511528#511528

 >

 >

 >   

 >

 >   

 > Guys:  We have built 2 RV 10's over the past 10 years.  The last one in 2018.  We put the standard kit Grove Brakes on the 1st one and Matco Brakes on the 2nd one.  The Matco Brakes with 4 pads certainly Brake much better.  You can replace the Groves without  much trouble if you want to spend the money and if I were to build another RV 10 I would install the Matcos.  They are about the same cost as the kit Groves.

 >   However, The Matcos add a fair amount of drag to the plane pushing it into the hanger especially with only a few inches of incline up to the door.  As a result, we built a tug for the 10.  It is made out of a 3/8" plate for the front tire to run up on and  10ga triangular side panels forming a triangular box for the wheel and cowling to fit in (a foot wide).  We drive it with a 12volt camper slide-out motor mounted in front of the wheel box (It turns at 8rpm and has 820 ft lbs torque whis is strong enough).   5/8" shafting from the motor extending out each side the width of the wheel box with #40 chain drive from a 3" sprocket on the drive shaft to a 6" sprocket bolted and spaced outside Harbor Freight 4.00-6 air inflated tires.  The drive tires are mounted to  the sides of the box with 5/8" fixed axels.  Put a handle about 5 feet long with a momentary 2 position switch for (forward and reverse) and a 12volt lawn mower battery in front of the box.  Mounted some 2 1/2" caste!

  rs just in front of the drive wheels so you can lift the wheel box and drive wheels off the ground by tilting wheel box up with the handle.� Total cost about $500.  Works fine.

 >

 >

 >

 

 

 

 ===========

  Email Forum -

 -List">http://www.matronics.com/Navigator?RV10-List

 ===========

 p;   - MATRONICS WEB FORUMS -

 ums.matronics.com

 ===========

 p;  - NEW MATRONICS LIST WIKI -

 matronics.com

 ===========

 p; - List Contribution Web Site -

 p;            �     -Matt Dralle, List Admin.

 ps://matronics.com/contribution

 ===========

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Bob Leffler
N410BL - Phase I
http://mykitlog.com/rleffler

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum