Matronics Email Lists :: View topic - iflyrv10 door pins question

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

iflyrv10 door pins question

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

werner schneider

Joined: 24 May 2021
Posts: 58

Posted: Thu Feb 02, 2023 6:00 am Post subject: iflyrv10 door pins question

As I had a longer stop due to life, I'm coming back now to one or two things were I just miss informations.

I bought 12 years ago the iflyrv10 door pins and striker plates, the pins had not yet the magnetos in there so I will try to add them myself, the question is about the thread on the pins, anybody any idea what size these are? I've tried several nuts I have but none did work. If someone could post as well a picture of theirs with a measure tape along I would appreciate it seems mine have a longer thread part (1").



I neither can find any instructions for them 



Thanks for your help, not so easy to find all the items again I left 10 years ago 



Cheers Werner

rleffler

Joined: 05 Nov 2006
Posts: 680

Posted: Thu Feb 02, 2023 6:32 am Post subject: iflyrv10 door pins question

I recently learned something the hard way.    If you have FlyRV10 pins and Aerosport interior panels, there isn�t enough clearance to use the vans supplied magnetic switches.

 

 

 The magnet in the ifyrv10 pin only works head on with the switch.   Whereas, the planearound pin magnets can work perpendicular to the pins, which solves the issue with the clearance with the Aerosport interior panel.

 

 

 If you've not installed them yet, I would highly recommend the planearound door pins and center latch over the iflyrv10 pins.  I know it's extra money, but it's worth it.

 

 

  

 

 Get Outlook for iOS

 

  From: owner-rv10-list-server(at)matronics.com <owner-rv10-list-server(at)matronics.com> on behalf of werner schneider <glastar(at)gmx.net>

 Sent: Thursday, February 2, 2023 9:00:27 AM

 To: rv10-list(at)matronics.com <rv10-list(at)matronics.com>

 Subject: iflyrv10 door pins question  

 

  --> RV10-List message posted by: "werner schneider" <glastar(at)gmx.net>

 

 As I had a longer stop due to life, I'm coming back now to one or two things were I just miss informations.

 I bought 12 years ago the iflyrv10 door pins and striker plates, the pins had not yet the magnetos in there so I will try to add them myself, the question is about the thread on the pins, anybody any idea what size these are? I've tried several nuts I have  but none did work. If someone could post as well a picture of theirs with a measure tape along I would appreciate it seems mine have a longer thread part (1").

 

 I neither can find any instructions for them 

 

 Thanks for your help, not so easy to find all the items again I left 10 years ago 

 

 Cheers Werner

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=510099#510099

 

 

 

 

 

 

 ===========

  Email Forum -

 -List">http://www.matronics.com/Navigator?RV10-List

 ===========

 p;   - MATRONICS WEB FORUMS -

 ums.matronics.com

 ===========

 p;  - NEW MATRONICS LIST WIKI -

 matronics.com

 ===========

 p; - List Contribution Web Site -

 p;            �     -Matt Dralle, List Admin.

 ps://matronics.com/contribution

 ===========

_________________
Bob Leffler
N410BL - Phase I
http://mykitlog.com/rleffler

partner14

Joined: 12 Jan 2008
Posts: 540
Location: Granbury Texas

Posted: Thu Feb 02, 2023 7:13 am Post subject: iflyrv10 door pins question

Simply put, if you follow Bob's advice below, you wll NEVER need any kind of sensor to tell you the door is closed.  The latch in the MIDDLE of the door solved ALL the problems.

                  

                                                                    On Thursday, February 2, 2023 at 08:42:03 AM CST, Bob Leffler <bob(at)thelefflers.com> wrote:                 

                 



                 



                          I recently learned something the hard way.    If you have FlyRV10 pins and Aerosport interior panels, there isn’t enough clearance to use the vans supplied magnetic switches.

 

 

 The magnet in the ifyrv10 pin only works head on with the switch.   Whereas, the planearound pin magnets can work perpendicular to the pins, which solves the issue with the clearance with the Aerosport interior panel.

 

 

 If you've not installed them yet, I would highly recommend the planearound door pins and center latch over the iflyrv10 pins.  I know it's extra money, but it's worth it.

 

 

  

 

 Get Outlook for iOS

 

  From: owner-rv10-list-server(at)matronics.com <owner-rv10-list-server(at)matronics.com> on behalf of werner schneider <glastar(at)gmx.net>

 Sent: Thursday, February 2, 2023 9:00:27 AM

 To: rv10-list(at)matronics.com <rv10-list(at)matronics.com>

 Subject: iflyrv10 door pins question  

 

  --> RV10-List message posted by: "werner schneider" <glastar(at)gmx.net>

 

 As I had a longer stop due to life, I'm coming back now to one or two things were I just miss informations.

 I bought 12 years ago the iflyrv10 door pins and striker plates, the pins had not yet the magnetos in there so I will try to add them myself, the question is about the thread on the pins, anybody any idea what size these are? I've tried several nuts I have  but none did work. If someone could post as well a picture of theirs with a measure tape along I would appreciate it seems mine have a longer thread part (1").

 

 I neither can find any instructions for them 

 

 Thanks for your help, not so easy to find all the items again I left 10 years ago 

 

 Cheers Werner

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=510099#510099

 

 

 

 

 

 

 ===========

  Email Forum -

 -List">http://www.matronics.com/Navigator?RV10-List

 ===========

 p;   - MATRONICS WEB FORUMS -

 ums.matronics.com

 ===========

 p;  - NEW MATRONICS LIST WIKI -

 matronics.com

 ===========

 p; - List Contribution Web Site -

 p;            �     -Matt Dralle, List Admin.

 ps://matronics.com/contribution

 ===========

_________________
Don A. McDonald
40636

werner schneider

Joined: 24 May 2021
Posts: 58

Posted: Thu Feb 02, 2023 7:39 am Post subject: iflyrv10 door pins question

Thanks Bob,

     

     I have the planearound center latch already, as I need to fit the     magnets anyway I would use the Vans magnetos and that works (just     tried it out).

     

     So back to my question any idea about the thread size 

     

     On 02.02.2023 15:32, Bob Leffler wrote:

     

      	  Quote: 	
		                                                 I recently learned something the hard way.    If you               have FlyRV10 pins and Aerosport interior panels, there               isn’t enough clearance to use the vans supplied magnetic               switches.

             

             

             The magnet in the ifyrv10 pin only works head               on with the switch.   Whereas, the planearound pin magnets               can work perpendicular to the pins, which solves the issue               with the clearance with the Aerosport interior panel.

             

             

             If you've not installed them yet, I would               highly recommend the planearound door pins and center               latch over the iflyrv10 pins.  I know it's extra money,               but it's worth it.

           

         

                    

           

           Get Outlook             for iOS

       

              From:           owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)           <owner-rv10-list-server(at)matronics.com> (owner-rv10-list-server(at)matronics.com) on behalf of           werner schneider <glastar(at)gmx.net> (glastar(at)gmx.net)

           Sent: Thursday, February 2, 2023 9:00:27 AM

           To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)           <rv10-list(at)matronics.com> (rv10-list(at)matronics.com)

           Subject: iflyrv10 door pins question          

       

                    --> RV10-List message posted by:               "werner schneider" <glastar(at)gmx.net> (glastar(at)gmx.net)

               

               As I had a longer stop due to life, I'm coming back now to               one or two things were I just miss informations.

               I bought 12 years ago the iflyrv10 door pins and striker               plates, the pins had not yet the magnetos in there so I               will try to add them myself, the question is about the               thread on the pins, anybody any idea what size these are?               I've tried several nuts I have but none did work. If               someone could post as well a picture of theirs with a               measure tape along I would appreciate it seems mine have a               longer thread part (1").

               

               I neither can find any instructions for them 

               

               Thanks for your help, not so easy to find all the items               again I left 10 years ago 

               

               Cheers Werner

               

               

               

               

               Read this topic online here:

               

               http://forums.matronics.com/viewtopic.php?p=510099#510099

               

               

               

               

               

               

               ===========

               Email Forum -

               -List">http://www.matronics.com/Navigator?RV10-List

               ===========

               p;   - MATRONICS WEB FORUMS -

               ums.matronics.com

               ===========

               p;  - NEW MATRONICS LIST WIKI -

               matronics.com

               ===========

               p; - List Contribution Web Site -

               p;                  -Matt Dralle, List Admin.

               ps://matronics.com/contribution

               ===========

Vol88

Joined: 13 Jul 2019
Posts: 9

Posted: Thu Feb 02, 2023 1:25 pm Post subject: Re: iflyrv10 door pins question

Werner,



I believe the threads you are asking about are specified in Step 1 on page 45-14 - 5/16" x 24 threads per inch.



Tom

werner schneider

Joined: 24 May 2021
Posts: 58

Posted: Thu Feb 02, 2023 2:28 pm Post subject: iflyrv10 door pins question

Thanks Tom,



it seems the x24 is correct, it's just strange as I can not screw an AN5 

nut onto the pins, maybe it is by design as they then hold better inside 

the alu tube?



Cheers Werner



On 02.02.2023 22:25, Vol88 wrote:

 	  Quote: 	
		   



 Werner,



 I believe the threads you are asking about are specified in Step 1 on page 45-14 - 5/16" x 24 threads per inch.



 Tom





 Read this topic online here:



 http://forums.matronics.com/viewtopic.php?p=510111#510111

Vol88

Joined: 13 Jul 2019
Posts: 9

Posted: Thu Feb 02, 2023 3:05 pm Post subject: Re: iflyrv10 door pins question

I just tried an AN5 nut on the stud that connects my aluminum tube to my Planearound pin. It fit perfectly, with no drag.



Perhaps your threads were damaged or contaminated? You could try running a rethreader (thread cleaner) to check and straighten the threads. I would start with a thread gauge to make sure it's 5/16-24 first.

Tim Olson

Joined: 25 Jan 2007
Posts: 2877

Posted: Thu Feb 02, 2023 3:59 pm Post subject: iflyrv10 door pins question

If that doesn't work, I'm guessing it's 5/16-18 if it looks coarse.

I can't remember for sure.

Tim

On 2/2/2023 5:05 PM, Vol88 wrote:

 	  Quote: 	
		   



 I just tried an AN5 nut on the stud that connects my aluminum tube to my Planearound pin. It fit perfectly, with no drag.



 Perhaps your threads were damaged or contaminated? You could try running a rethreader (thread cleaner) to check and straighten the threads. I would start with a thread gauge to make sure it's 5/16-24 first.





 Read this topic online here:



 http://forums.matronics.com/viewtopic.php?p=510113#510113

werner schneider

Joined: 24 May 2021
Posts: 58

Posted: Fri Feb 03, 2023 5:38 am Post subject: iflyrv10 door pins question

I have the iFlyRV10 pins not the planearounds 



On 03.02.2023 00:05, Vol88 wrote:

 	  Quote: 	
		   



 I just tried an AN5 nut on the stud that connects my aluminum tube to my Planearound pin. It fit perfectly, with no drag.



 Perhaps your threads were damaged or contaminated? You could try running a rethreader (thread cleaner) to check and straighten the threads. I would start with a thread gauge to make sure it's 5/16-24 first.





 Read this topic online here:



 http://forums.matronics.com/viewtopic.php?p=510113#510113

werner schneider

Joined: 24 May 2021
Posts: 58

Posted: Fri Feb 03, 2023 5:39 am Post subject: iflyrv10 door pins question

Thanks Tim, I have to see where I misplaced my imperial thread guide 



On 03.02.2023 00:58, Tim Olson wrote:

 	  Quote: 	
		   



 If that doesn't work, I'm guessing it's 5/16-18 if it looks coarse.

 I can't remember for sure.

 Tim

 On 2/2/2023 5:05 PM, Vol88 wrote:

> 

>

> I just tried an AN5 nut on the stud that connects my aluminum tube to 

> my Planearound pin. It fit perfectly, with no drag.

>

> Perhaps your threads were damaged or contaminated? You could try 

> running a rethreader (thread cleaner) to check and straighten the 

> threads. I would start with a thread gauge to make sure it's 5/16-24 

> first.

>

>

> Read this topic online here:

>

> http://forums.matronics.com/viewtopic.php?p=510113#510113

>

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum