Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Is anyone out there?

Matronics Email Lists Forum Index -> Corvette-List

View previous topic :: View next topic

Author Message

Lanny Fetterman

Joined: 10 Jan 2006
Posts: 37
Location: Catawissa Pa.

Posted: Sat Feb 02, 2008 6:14 am Post subject: Is anyone out there?

I own a 2000 FRC, I have been subscribed to this list for several months 

and have yet to receive a list related E-mail. I also belong to the KOLB 

list that has lots of activity, and several Corvette forums with daily 

postings. Is there something wrong with my computer set up, or am I the 

only Corvette owner on this list at this time? Someone please reply, I feel 

so alone! Lanny    PS I am shopping for a C5 for my wife, I live in 

northeastern Pa.

_________________
Lanny Fetterman Firestar II N598LF

bulsr(at)bellsouth.net
Guest

Posted: Sat Feb 02, 2008 7:28 am Post subject: Is anyone out there?

Hey, I'm in the same boat with you. I suspect that either nobody lives here anymore, or just checking the box to sign up for the forum isn't sufficient. 

Bob

  ator t      [quote][b]

tcervin(at)embarqmail.com
Guest

Posted: Sat Feb 02, 2008 9:15 am Post subject: Is anyone out there?

I've been on the list for quite some time.....very little activity. I'm a C2 fan and have found the Corvette Forum to be very active.

                                                Tom in Ohio



                 

---

copeters(at)mindspring.co
Guest

Posted: Sat Feb 02, 2008 12:33 pm Post subject: Is anyone out there?

Lanny,



    I have a 64 roadster, all numbers match. It has a 327 250 hp single 4

barrel. It has never been apart, car or engine and presently has about

90,000 miles since new. I have owned my car for the last 15 years and would

never sell it. Ain't vettes neat.  Chuck



--

tcervin(at)embarqmail.com
Guest

Posted: Sat Feb 02, 2008 2:17 pm Post subject: Is anyone out there?

My C2 is 66 Roadster 327-350 hp matching numbers. I've owned more years than I want to admit. Getting ready to do a frame off to enjoy a lot of cruising in retirement.

    She's not for sale either.

                                                               Tom 

---

GrummanDude

Joined: 15 Jan 2006
Posts: 926
Location: Auburn, CA

Posted: Sat Feb 02, 2008 7:42 pm Post subject: Is anyone out there?

I'm on the list too.  I started the TeamGrumman-List (www.AuCountry.com).   

  I joined the Corvette list to see if there was any activity.  That was some a few years back.  

  

  I had a 69 427 Corvette in 75.  I've often pondered the concept of a 79-71 Corvette with a C-5/C-6 chassis or just a major redo of the 70-71 suspension to take advantage of newer technology. I've also thought of installing an LS-7 with a 6-speed auto in it also.  

  

  Until I have a whole lot of spare money, I'll just keep driving my Tahoe.

  Gary

 

 

 --

_________________
Gary
AuCountry Aviation
Home of Team Grumman

vettin74(at)yahoo.com
Guest

Posted: Sun Feb 03, 2008 5:45 pm Post subject: Is anyone out there?

I wonder if any one was here...i have been on the list for 2 years now and have gotten about a dozen emails.....

   

  74 singray under resto

   

  93 LT1 coupe 6 speed...run this one in autocross....TN SCCA

   

  Nick 



teamgrumman(at)aol.com wrote:

  [quote]I'm on the list too.  I started the TeamGrumman-List (www.AuCountry.com).     

  I joined the Corvette list to see if there was any activity.  That was some a few years back.  

  

  I had a 69 427 Corvette in 75.  I've often pondered the concept of a 79-71 Corvette with a C-5/C-6 chassis or just a major redo of the 70-71 suspension to take advantage of newer technology. I've also thought  of installing an LS-7 with a 6-speed auto in it also.  

  

  Until I have a whole lot of spare money, I'll just keep driving my Tahoe.

  Gary

--

stepinwolf

Joined: 21 Jan 2008
Posts: 133
Location: Canada

Posted: Sun Apr 13, 2008 2:39 am Post subject: Re: Is anyone out there?

Hi, 



I have been extremely active on a few of the more popular Corvette Forums with thousands of posts, and have just recently joined the " List ". 



The reason is because I have just started to build ( from plans ) a Zenith CH 701 project, and the list seems to me as being a great place to be for help in my new project.



A C2 fan for the past 40 years, I presently own a total of five cars, some complete, and others in the building stage.  An NCRS judge for many years, my present interests are mostly in the building of the more popular " Resto-Mods "



To see what I have been up to, you may visit my web page at the following



www.autoretro.info 



Stepinwolf



The attached photo, is my present ride, which was also built from scratch, starting only with a bare Vin-Tag.

cadeau.JPG

Description:

Filesize:

62.82 KB

Viewed:

1442 Time(s)

_________________
Long wing + vga's, = lo & slo

rrutkf_4(at)yahoo.com
Guest

Posted: Sun Apr 13, 2008 3:58 pm Post subject: Is anyone out there?

Veeery nice 65 or 66 roadster.  I wish grandma would

let me build a 701, I could fly it out of the backyard

until the economy improves and they build houses back

there.

Bob R

--- stepinwolf <robert.pelland(at)cgocable.ca> wrote:



 	  Quote: 	
		   

 <robert.pelland(at)cgocable.ca>

 

 Hi, 

 

 I have been extremely active on a few of the more

 popular Corvette Forums with thousands of posts, and

 have just recently joined the " List ". 

 

 The reason is because I have just started to build (

 from plans ) a Zenith CH 701 project, and the list

 seems to me as being a great place to be for help in

 my new project.

 

 A C2 fan for the past 40 years, I presently own a

 total of five cars, some complete, and others in the

 building stage.  An NCRS judge for many years, my

 present interests are mostly in the building of the

 more popular " Resto-Mods "

 

 To see what I have been up to, you may visit my web

 page at the following

 

 www.autoretro.info 

 

 Stepinwolf

 

 The attached photo, is my present ride

 

 --------

 Live each day, as if it was your last

 

 

 

 

 Read this topic online here:

 



http://forums.matronics.com/viewtopic.php?p=176518#176518
	


 	  Quote: 	
		   

 

 

 

 Attachments: 

 

 http://forums.matronics.com//files/cadeau_160.jpg

 

 

 

 



 browse

 Un/Subscription,

 FAQ,

 http://www.matronics.com/Navigator?Corvette-List



 Forums!



 Admin.



 

 

 

 


	




__________________________________________________

dougsnash

Joined: 14 Apr 2008
Posts: 281

Posted: Mon Apr 14, 2008 11:20 am Post subject: Re: Is anyone out there?

Hey Stepinwolf, what is it about CH-701s and Corvettes?  I'm also scratch building a Zenith CH-701.  My previous financial black hole (ie: hobby) was old cars.  I've had my '79 L-48 for about ten years.  About four years ago I did some "upgrades" to the engine and have never been happy with it since.  Finally I am in the process of dealing with some of the details that will make this into the true performance car it should be.  



I have to get my vacuum advance working correctly, I rebuilt the carb last week, I have a leaking tranny dipstick seal, I have a stripped stud on the passenger side exhaust manifold.  Once all of these little tidbits are looked after I'll need to do some work to the rear suspension.  Nothing too critical there but it is a 29 yr old car that has spent way too many years sitting.



Doug MacDonald

NW Ontario, Canada

stepinwolf

Joined: 21 Jan 2008
Posts: 133
Location: Canada

Posted: Mon Apr 14, 2008 12:48 pm Post subject: Re: Is anyone out there?

Hi Doug,



I have been reading your posts for months now, and was looking for a reason to get in touch.  It's nice to see another Canuck that has more then one thing in common with me.



As for the 701, I am still in the stages of setting up my shop. I do have a four car garage, but it's no place to scratch build an airplane, so I am converting a large section of my 1800 sq.ft. basement, in order to have enough space to do the building.



I already have almost all the professional tools, including the necessary hardware, ( I still have a large order to pick up at Mark's ) and will be picking up almost 4K worth of aluminum, and 4130 from " Dillsburg Aero " when I get down to the Corvette show in Carlisle in late August. 



As far as the Corvettes are concerned, although I love the cars, I build them mostly for resale.  Not that I wouldn't want them in my garage, but when it gets to the point that they are worth more then my house, I can not afford to keep them on my disability pension. 



Keep in touch, and informed on anything " 701" that I should know about.



You have my very best regards 



Bob

the 701 scratch builder

Three Rivers , Quebec

7-7143

_________________
Long wing + vga's, = lo & slo

Display posts from previous:

	Matronics Email Lists Forum Index -> Corvette-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum